News

How to make an aluminum door for a $200 iPhone 5s

The iPhone 5S comes with an aluminum case and a trinidathid glass body, both designed to hold a smartphone’s glass, as well as to keep the glass from scratching.

The glass itself is glass that is treated with a chemical called trinadi-isopropyl alcohol, or TiO 2 .

But there is another chemical used in the process of making glass, which is commonly known as aluminum.

When TiO is heated in a furnace, it produces an aluminum oxide called alumina.

Aluminum oxide is not the same thing as aluminum, which also has a number of other properties that make it an excellent material for making an iPhone case.

For example, the aluminum oxide produces a very strong adhesive that is used to hold the case together.

Aluminum also has the advantage of being able to withstand extreme temperatures and high pressure.

A case is an extension of a phone’s internal components, which can be used for a variety of different tasks.

For the iPhone 5, the case includes a glass panel that can be attached to the back of the phone.

The aluminum is glued onto the glass panel, which then comes in contact with the glass.

The adhesive used in this adhesive can be applied to the phone using a tool called a glue gun.

It is important to note that there is a lot of adhesive involved, as the phone’s adhesive is not completely strong.

You’ll need to use a glue stick that is applied to a hard surface and then wiped down with a clean cloth to remove the excess adhesive.

The glue is then applied to all of the edges of the case.

The first step is to coat the aluminum with the adhesive, which should take no more than 15 minutes.

This is done using a flat-tooth comb.

If you need to apply more pressure, you can also use a nail clipper.

Once the adhesive has been applied, it’s time to attach the phone to the case, which involves inserting the phone in the case with the phone on top and then placing the phone back in the phone case.

This process takes some practice.

The phone is then placed back into the case and the adhesive is applied again.

This time, the phone will be attached with a glue-gun attachment.

The next step is the glue gun attachment, which takes less time.

This step involves inserting a glue needle into the glue-hole and then pulling the phone out of the glue.

Once in place, the adhesive can then be removed with a cloth.

The last step is for the phone itself to be attached, which requires a screwdriver.

The iPhone case is made of aluminum, aluminum alloy, and a combination of aluminum and glass.

This material can be coated with a strong chemical called alumine, which produces a stronger adhesive.

It also has other properties, such as high thermal conductivity, which makes it a good choice for cases.

For more information on aluminum and case making, read our iPhone 5 case article.

For a quick look at the iPhone’s aluminum body, check out our iPhone 4S aluminum case.